CLC Coherent Han's Laser Marking Parts Tube/Controller/Power Supplies - Parts
- SKU:
- A30D001
- MPN:
- C-70
- Shipping:
- Calculated at Checkout
- Condition:
- For Parts or Not Working
- Warranty & Returns:
- Final Sale – No Returns
- Product Type:
- Laser Marking Parts
Description
Manufacturer: Controllaser CLC
Model: C-70
Condition: For Parts or Not Working. Comes in non-original packaging. The laser head was near a liquid applicator and has black "stuff" (we don't know what) splashed on the outside. The controller and computer have "rack rash" and other ugly scratches. The output focusing lens has damaged coatings. The controller has several missing and misplaced connectors (see photo). Please NOTE: many of the labels on these parts are faded or worn away. The laser head is a match for Coherent model C-70 based on dimensions, warning label markings, and power requirement, as found in manuals from Coherent online.
The photos show the exact item(s) the buyer will receive.
Notes: This lot is in PARTIAL working condition. It was removed from a decommissioned, most of which is missing, so we were not able to get the laser working without shenanigans. We found the shutter will open/close when an Interlock cable is closed, but the software didn't see it. The Laser Marking Studio software was able to communicate with the LaserHI parts, including the EMCC.
When 48V was applied to the laser tube, we found "Good" signals on the Laser OK, Temperature OK, and Voltage OK lines, and the +15V output is present. We asserted the Control Enable and Modulation Input signal lines high, and our amp meter increased current quickly to just under 18", indicating a strong laser ouput (we are not equipped to measure laser power). We put a piece of paper in the shutter area and made the laser fire again, and the paper burst into flame! The laser cooling fans all run, and are loud.
We verified the scanner mirrors move by applying an AC signal to the logic level motion pins on their driver boards, and noting motion of each mirror as expected. The computer boots and loads the former machine software without errors, and Han's ActiveDog program can read the numbers of the dongle and card, but will not Bind them to each other; we suspect the configuration was changed or else the license was corrupted somehow, we are not sure which. The power supply in the laser controller gave all green lights on all modules. No other testing was done.
This is not a fully working system ready to work. A qualified engineer will have to tinker with this to get it marking again. This lot is being sold AS/IS for parts or repair.
No manuals, cords/cables, or additional items are included if not listed or shown.
Included:
- (1) Coherent C-series Laser with Shutter and Scanner
- (1) CLC-3U-IGPM Controller
- (1) Key for the Controller
- (1) Windows PC
- (1) Han's Laser USB Dongle/Hardware Key (in the controller)
- (1) Excelsys XGEN Laser DC Power Supply
- Cables to connect controller to shutter and scan head
Specifications:
- Manufacturer: Control Laser Corporation
- Parts from a ProWriter C55 industrial marking laser system
- Coherent 70 Watt laser
- Han's Laser shutter, control card, and scanning head
- Power supplies included
- Computer and control loop parts included, not fully working
-
Laser tube: Coherent C Series P/N 1138376 (model C-70, see notes!)
- Output power: 70 Watts
- Wavelength: 10.6 μm infrared
- Beam diameter: 3.6mm, +/-0.5mm
- Sealed CO2 laser, air-cooled
- Integrated RF section
- CW or modulated operation
- Beam expander between laser and shutter: 06-GBE36-6X-10.6, 6x magnification
- Solid aluminum shutter leaf
- Lens: unmarked
- Marking control card: EMCC3200-YLPM
- Laser DC supply: Excelsys XGEN XCE, 48V 1.3kW
- Controller: CLC Custom 2.5, CLC-3U-IPGM, 19" rack mount
-
Controller contents:
- Auxiliary Control Board 236862
- YLP-22-73-01A-01A
- Excelsys UltiMod UX6 1200 Watts, 24V, +15V -15V, 7V
- Orico USB hub
- Switches for ON/OFF, START, Laser Shutter ON/OFF, and Emergency Stop
- Indicators for Ready, ALARM, Laser On
- Computer: Gigabyte GA-H170-D3HP, Intel Core i3-6100 @ 3.7 GHz, 4GB Ram, Windows 7 Pro
- Manufactured in 2017
CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.
Warranty Information
Final Sale – No Returns
- Products listed as "No Returns" are sold as-is, with no guarantee of functional status.
- These products may or may not have additional defects not described.
- Returns for “as-is” products are only considered if the reason is seller error (e.g., wrong product sent, inauthenticity).
Return Authorization
- If a return is requested due to seller error, Dougdeals reserves the right to accept or deny the return.
- Unauthorized returns of “as-is” products will be made available for return to the buyer at the buyer’s expense.
- If a return is accepted:
- The return must include an assigned RMA (Return Merchandise Authorization) number.
- The item must be received within 21 days of return authorization.
- Returns received after the 21-day return window will only be returned to the buyer at the buyer’s expense.
Return Requests
- Seller Error: Examples include wrong product sent or inauthenticity.
- Dougdeals may deduct original and return shipping costs from the refund for items found to be accurately described.
- Additional deductions may be applied to cover labor costs for processing returns.
- Buyer Error: Examples include wrong part ordered, compatibility issues, no longer needed, or found a better price.
- No returns are accepted for buyer error.
Exclusions and Limitations
- Replacement or substitute items may be sent instead of a refund at Dougdeals’ discretion.
- Returned items must be in the same condition as when sent and include all components.
- Dougdeals reserves the right to deduct costs from refunds for items altered or damaged during shipping.
Shipping and Responsibility
- Original shipping costs are non-refundable for orders shipped internationally or to U.S. territories, Alaska, or Hawaii.
- Buyers are responsible for:
- International and expedited shipping costs, import fees, calibration fees, and testing fees.
- Any loss or damage during transit for shipments arranged by the buyer.
- Damage occurring during transit via Dougdeals-arranged third-party services or Dougdeals employee delivery must be noted in writing on the delivery receipt at the time of delivery.
- Failure to note damage voids Dougdeals’ ability to assist with damage claims, and the buyer must seek restitution from the shipping service.
- Customs, duties, taxes, brokerage fees, and all import-related costs for international shipments are the buyer's responsibility.
Contact Us
Headquarters:
CDN Systems | DougDeals
12510 Trails End Rd.
Leander, TX 78641
Contact via phone:
Toll free: 877-328-9236
Main office: 512-933-0081
Local Craigslist: 512-913-6048
Local eBay: 512-999-3894
Fax: 512-873-0745
Contact online:
Sales inquiries: sales@dougdeals.com
Craigslist and local sales: local@dougdeals.com
Customer support: support@dougdeals.com