Bee DeBee 2000 High Pressure Pilot Plant Homogenizer 30,000 PSI 1L/min Hydraulic

Manufacturer: Bee

Model: DeBee 2000

Condition: For Parts or Not Working. This item is in Fair cosmetic condition, and visibly incomplete.  There is a missing safety cover on the working area, and the interlock has been bypassed with a little taped-on fixture.  There are several missing parts (we are not sure what, exactly) in the working area. There are lots of scuffs/scratches all over the place, and some light oil residues inside.  Someone added a large heat exchanger, and mounted it under the top inside, with hose barbs extending to the right side of the machine.  All around the top of the working area are a series of holes for mounting the safety cover.  There is a missing screw for the top cover.  There are several holes all over, with unknown functions.  The main power input switch is missing its operator but can still be turned.

Please NOTE: There is a chart on the control panel giving hydraulic-to-process pressure readings, which stops at 1400/30000 PSI.  The hydraulic unit can give up to 2400PSI, so we're not sure what exact maximum process pressure this unit can give.
The photos show the exact item(s) the buyer will receive.

Notes: This homogenizer is in PARTIAL working condition.  At power-on, it gives an alarm (shown) about a pressure sensor.  The error can be ignored, and the machine can run a cycle by pressing the appropriate buttons.  The back-pressure indication always stays at the shown 33600 PSI.  Temperature readings shoot up and down during a cycle.  With the cover removed, a bypass fixture (taped in place) allows a cycle to run.  The hydraulic power unit works well, and builds pressure to just over 2400PSI.  The pistons go through their extend/retract action, as can be seen through holes in the press units.  The power main switch can be operated with a pliers, and still works normally.  The emergency stop switch works.  No other testing was done.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) DeBee 2000 Homogenizer

Specifications:

• Manufacturer: B.E.E. International
• Model: DeBee 2000
• With 10 horsepower hydraulic power unit
• Modular homogenizer cells
• Dual feed and dual jet
• Can be used with Abrasive and viscous materials
• Easy to clean, clean in place
• Full user control over pressure
• Suitable for continuous operation in small-scale production
• PLC control for monitoring and simple push-button operation
• Heat exchanger for product cooling
• Stainless steel enclosure
• Continuous flow up to 1 liter/minute
• Adjustable operating pressure 2000 to 30,000 PSI
• Adjustable back pressure
• Power supply requirement: 3phase 230V 60Hz
• Weighs about 900 lbs.
• NOT complete!  Sold AS-IS!

AS-IS

• No returns - No refunds - No exchanges
• By purchasing this item, you are agreeing to not seek reimbursement should the item not function to the manufacturer's specifications.
• Read the notes carefully to ensure you are buying something you can use
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.