Site Information


 Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

Newport XML350 Ultra-Precision 35cm Translation Stage Ironless Linear Motor XML

Current Stock:

Product Description

Manufacturer: Newport

Model: XML350

Condition: Used. Comes in non-original packaging.  This stage is in Fair cosmetic condition with minor light scratching top and bottom, with heavier scratches on bottom.  There are some color changes in the anodization (probably from cleaning with alcohol).  There is minor "surface" corrosion on the linear bearings, not on the bearing area.  Note that the Motor and Therm cables both terminate in dressed wire ends, not connectors, for use in screw terminal connectors at the drive end.

The photos show the exact item(s) the buyer will receive.

Notes: This stage was removed from a decommissioned system and not tested separately, except to note the table slides extremely freely while not feeling loose (normal).  No other testing was done.

No manuals, cords/cables, or additional items are included if not listed or shown.


  • (1) Newport XML 350 Motorized Stage
  • (1) E4024A Therm Cable
  • (1) E3762A Motor Cable
  • (1) E3763A Encoder Cable


  • Manufacturer: Newport Micro-Controle
  • Model: XML350
  • Z1038A
  • Ultra-precision linear translation stage
  • Dimensions: 555 x 180 x 80 mm
  • Travel: 350 mm
  • Extremely low friction motion in 1 axis
  • Capable of consistent, reliable 1nm incremental motion
  • Suitable for 24/7 production applications
  • Non-contact, direct-drive system - no backlash, hysteresis, wind-up, or stiction
  • High-precision glass scale encoder with 80nm repeatability
  • Extra-large ironless high-efficiency linear motor minimizes heat generation
  • Ultra-quiet anti-creep crossed-roller bearings for ripple-free motion
  • Stress-relieved aluminum construction
  • Precision ground surfaces
  • Accuracy, Typical: ±0.5 µm
  • Bi-directional Repeatability, Typical: ±0.035 µm
  • Flatness Typical: ±0.75 µm
  • Maximum speed: 300 mm/s
  • Maximum acceleration: 5 m/s
  • Maximum continuous force: 37 N
  • Centered load capacity: 300 N
  • MTBF: 20,000 h
  • Top has lots of metric threaded holes
  • Optical limit switches on encoder track
  • Bottom has clearance mounting holes
  • Drive: 3 phase synchronous ironless motor without hall effect sensors, 48V 1.9A
  • ESP compatible
  • Tecnotion magnetic yoke 504mm
  • Encoder scale: Heidenhain LIF 401R 514 782-06
  • Linear motion bearings: Schneeberger RNG 6 550 KS SP

With Motor, Therm and Encoder cables

30 Day Guarantee

  • Guaranteed to be as described
  • Can be returned for flaws or malfunctions that were not disclosed
  • See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.

Other Details


Find Similar Products by Category