Marq HPA-2101-T(RH) Carton Sealer Box Taper 480V 3phase MOSTLY working - Parts

Manufacturer: Marq

Model: HPA-2101-T(RH)

Condition: For Parts or Not Working. This taper is in Fair cosmetic condition.  There is dust/dirt and residues from prior use all over. Inside the moving parts the dust is greasy. The rollers on the taping head have slices and bits of old tape on them. There is no door for the electrical enclosure. A couple of the adjustment brackets for the auxiliary guide rollers and kicker sensors are missing set bolts. This is being sold AS/IS. The photos show the exact item(s) the buyer will receive.

Notes: This taper is in PARTIAL working condition.  We were able to run a few boxes through and they were taped closed on top, BUT the sensor dangling loose by the infeed end is not working.  Setup is a bit fussy and not hard to get wrong, when changing box sizes.  The taping head was able to tape a box despite sitting at an angle. The kicker raises and lowers automatically after the start button is held for a few seconds. No other testing was done. This is being sold AS/IS. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Marq HPA-2101 Box Taper

Specifications:

• Manufacturer: Marq Packaging Systems, Inc.
• Model: HPA-2101-T(RH)
• Carton sealer
• Top seal
• Side drive
• Box minimum dimensions: 8" Wide x 11" High
• Box maximum dimensions: 15" Wide x 18" High
• Power input: 480V 3phase 3.6A 60Hz, plus compressed air

AS-IS

• No returns - No refunds - No exchanges
• By purchasing this item, you are agreeing to not seek reimbursement should the item not function to the manufacturer's specifications.
• Read the notes carefully to ensure you are buying something you can use
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.