Dymax Light-Welder 38903 Blue Wave 200 Ultraviolet Curing System UV with Optics

Manufacturer: Dymax

Model: BW-200

Condition: Used. Comes in non-original packaging. This lot is in Good cosmetic condition with only minor scuffs/scratches/residues from prior use.  There are rub marks on top from the feet of a second unit which was stacked on this one.  There is a faded permanent-marker number on top, 1 or 2 depending on the unit you receive.  The back panel has some tape adhesive residue from the previous installation's ventilation system.  The label on the side describes a long-ago lamp replacement.  The front of the lens is dented a little, which does not affect operation.

Please NOTE: we have a couple of these at the moment, the lamp hours of your unit will be somewhere between a thousand and sixteen-hundred-ish as shown.
Cosmetic appearance may vary slightly from pictured unit(s).

Notes: This system is in Good working condition.  When the contacts of the included 1/4" plug are shorted (simulating a foot switch) the shutter opens and a bright violet light is emitted from the fiber output end.  With the lens installed, more than a few inches from a target, a uniform square of violet light is emitted.  No other testing was done.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Dymax BW-200 UV Spot Light
• (1) Liquid Light Guide
• (1) Lens
• (1) 1/4" Plug

Specifications:

• Manufacturer: Dymax
• Model: Blue Wave 200 (BW-200)
• Light-Welder/ Ultraviolet curing system
• High intensity ultraviolet spot lamp
• 200 Watts short-arc Hg vapor bulb
• Adjustable intensity
• Rated for continuous operation
• Emits UVA and visible light (300-450nm)
• Actuate by foot pedal or PLC
• Universal power input provides consistent performance at any voltage
• Electronic shutter
• Timed or manual shutter opening modes
• Dual hours meter (system and lamp hours)
• Up to 2,000 hours useful bulb life
• Intensity output: 40 W/cm2 total
• UVB: 7mW/cm2
• UVA: 17+W/cm2
• Visible: 17+W/cm2
• Power requirement: 115-230V 50/60Hz 2.5A
• Active fan cooling
• With sticker "Lightguide filter not installed PN 38668"
• Light guide: 250i311
  • Plugs into front panel
  • Flexible
  • Liquid core in plastic tubing
  • Output end: 10mm minor diameter, 15.3mm major diameter
  • Lens projects a square of uniform light

30 Day Guarantee

• Guaranteed to be as described
• Can be returned for flaws or malfunctions that were not disclosed
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.