Description

Manufacturer: Wago

Model: 750-337

Condition: Used. Comes in non-original packaging. This coupler and module setup is in good condition with minor scuffs and scratches from previous use, but nothing that would affect functionality.
The photos show the exact item(s) the buyer will receive.

Notes: This coupler and module setup were removed from a working setup and have not been tested since their removal.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

(1) WAGO 750-337 I/O Fieldbus Coupler CANopen
- (4) WAGO 750-430 8-channel digital input; 24 VDC; 3 ms
- (1) WAGO 750-457 4-channel analog input; ±10 VDC; Single-ended
- (2) WAGO 750-670 Stepper Controller; RS-422/24 VDC; 20 mA
- (1) WAGO 750-600 End Module

Specifications:

Manufacturer: WAGO
Model: 750-337
Description: I/O Fieldbus Coupler CANopen
- Communications CANopen
- Number of fieldbus nodes on master (max.) 110
- Transmission rate 10 kBd … 1 MBd
- Bus segment length (max.) 1000 m
- Transmission medium (communication/Fieldbus) Shielded Cu cable 3 x 0.25 mm²
- Number of modules per node (max.) 64
- Number of PDOs 32 Tx / 32 Rx
- Number of SDO 2 SDO servers
- COB ID distribution SDO, standard
- Node ID distribution DIP switch
- Communication profile DS-301 V4.1er of modules without a bus extension (max.) 64
Manufacturer: WAGO
Model: 750-430
Description: 8-channel digital input; 24 VDC; 3 ms
- Number of digital inputs 8
- Number of Channels 8
- Signal type Digital
- Signal type (voltage) 24 VDC
- Sensor connection 8 x (1-wire)
- Input characteristic high-side switching
- Input filter (digital) 3ms
- Input current per channel for signal (1) type. 2.8mA
- Voltage range for signal (0) −3 … +5 VDC
- Voltage range for signal (1) 15 … 30 VDC
- Input data width (internal) max. 8Bit
- Supply voltage (system) 5 VDC; via data contacts
- Current consumption (5 V system supply) 17mA
- Supply voltage (field) 24 VDC
Manufacturer: WAGO
Model: 750-457
Description: 4-channel analog input; ±10 VDC; Single-ended
- Number of analog inputs 4
- Number of Channels 4
- Signal type Voltage
- Signal type (voltage) -10 … +10 VDC
- Sensor connection 4 x (2-wire)
- Input voltage (max.) ±40 V
- Signal characteristics Single-ended
- Resolution [bit] 12Bit
- Data width 4 x 16-bit data; 4 x 8-bit control/status (optional)
- Internal resistance 100kΩ
- Conversion time (typ. ≤) 10ms
- Measurement error, reference temperature 25°C
- Measurement error, deviation max (upper-range value) ≤± 0.1%
- Temperature error max. (upper-range value) ≤± 0.01%/K
- Supply voltage (system) 5 VDC; via data contacts
- Current consumption (5 V system supply) 65mA
- Supply voltage (field) 24 VDC
Manufacturer: WAGO
Model: 750-670
Description: Stepper Controller; RS-422/24 VDC; 20 mA
- Device-specific Operating modes: Individual positioning, reference run, jog, tip, command tables, PWM
- Number of digital inputs 2
- Number of outputs 1 channel (2 differential outputs A1, A2, B1, B2)
- The input filter 100 µs, software filter can be connected
- Input current (typ.) 2.8 mA
- Output current per channel 0.03A
- Output current short-circuit-protected
- Load type RS-422, TTL, optocoupler
- Voltage range for signal (0) −3 … +5 VDC
- Voltage range for signal (1) 15 … 30 VDC
- Signal voltage 5 VDC (internal), 5 … 24 VDC (external)
- Signal frequency (min.) 0Hz
- Signal frequency (max.) 500000Hz
- Resolution 15 bits + 16 bit Prescaler
- Stepper resolution 23 bits + sign bit
- Duty cycle 50 % (in stepper motor mode)
- Data width 12-byte input/output
Manufacturer: WAGO
Model: 750-600
Description: End Module
- Connectable conductor materials Copper
- Ports 8

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.

View AllClose

Warranty Information

Easy 30-Day Free Returns

Items can be returned for any reason within 30 days of delivery.
To initiate a return, the buyer must notify Dougdeals in writing within this period.
Dougdeals will cover return shipping costs and process a full refund, including the original shipping charges, within two business days of receiving the returned item.

Return Authorization Requirements

Returns must be authorized by Dougdeals and include an assigned RMA (Return Merchandise Authorization) number.
Dougdeals will arrange return shipping and provide a return label to the buyer.
Authorized returns must be received by Dougdeals within 21 days of authorization.

Exclusions and Limitations

Dougdeals may provide a replacement or substitute item instead of a refund at its discretion.
Returned items must be in the same condition as when sent and include all components.
There is no restocking fee, but Dougdeals reserves the right to deduct costs from the refund for altered or damaged items.
This return policy does not apply to orders shipped internationally, to U.S. territories, Alaska, or Hawaii.

Shipping and Responsibility

Buyers are responsible for international and expedited shipping costs, import fees, calibration, and testing fees.
Damages occurring during transit via Dougdeals-arranged third-party services or Dougdeals employee delivery must be noted in writing on the delivery receipt at the time of delivery. Failure to do so will result in the buyer assuming responsibility for damage claims.
Dougdeals is not liable for loss or damage during transit via buyer-arranged shipping services.
Customs, duties, taxes, and brokerage fees for international shipments are the buyer's responsibility.

Contact Us

Headquarters:
CDN Systems | DougDeals
12510 Trails End Rd.
Leander, TX 78641

Contact via phone:
Toll free: 877-328-9236
Main office: 512-933-0081
Local Craigslist: 512-913-6048
Local eBay: 512-999-3894
Fax: 512-873-0745

Contact online:
Sales inquiries: sales@dougdeals.com
Craigslist and local sales: local@dougdeals.com
Customer support: support@dougdeals.com