Viking LS224A Positive Displacement Pump 200PSI 200GPM

Manufacturer: Viking

Model: LS224A

Condition: Used. Comes in non-original pacakging. This pump is in fair cosmetic condition overall, with a few notable blemishes. There are various minor dings and areas where the paint was rubbed away during storage.  The corners on the end of the keyway on the input shaft are dinged.  The whole pump is a nice blue, because it was painted...right over the grease around the input shaft and the oil on the shaft in the middle/open web area.  The input shaft was masked with duck tape and we removed most of the residue.  We poked the middle shaft with a finger and the paint peeled off!  There is also some oil in the middle, of which we don't know the source.  The pump housing itself looks clean inside, and everything is coated in a light oil.  There are some very light scratches on the rotor.  The worst blemish we saw on the rotor looked like very light rust on one part, but it rubbed off; what remains is visible in picture #8 on the top/right.  There is very light 'surface' rust on the flanges that matches lines on the flange covers; this probably happened in storage.
The photos show the exact item(s) the buyer will receive.

Notes: This pump is in good working condition as far as we can test.  The previous owners had stored it as a spare.  The input shaft turns easily with hand pressure, and slight rubbing and clinking noises can be heard in the pump.  One spot in the rotation is a little less easy to turn, but it is still hand-turn-able (is that a word?). No other testing was done.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Viking LS224A Pump

Specifications:

• Manufacturer: Viking Pump (Idex Corp)
• Model LS224A
• Internal Gear Pump, Positive Displacement
• Foot mounted
• Size: LS
• Standard-jacketed for heating/temperature control, compatible with steam or liquid
• Maximum hydrostatic pressure: 400 PSI
• Maximum discharge pressure @ 100 SSU @ rated speed: 200 PSIG
• Nominal flow: 200 GPM
• Nominal speed: 640 RPM
• Maximum recommended temperature: 450 ºF
• Port size: 3" nominal, with 9" flanges
• 90º ports, can be clocked in 45º increments
• Can be direct driven, gear reducer or v-belt driven
• Seal location: stuffing box with universal (packed) seal design
• Cast iron housing and rotor, bronze bushing
• Suitable for both thin and thick liquids
• Operates equally well in either direction
• Rotation determines which port is the inlet/outlet

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.