SMC Pneumatics AMG250C-02BC Ambient Dryer w/ Compressed Air Treatment Assembly

Manufacturer: SMC Pneumatics

Model: AMG250C-02BC

Condition: Used. Comes in non-original packaging. This assembly is in good cosmetic condition, with some wear from prior use. Some residue from prior use is accumulated inside the filters.
The photos show the exact item(s) the buyer will receive.

Notes: This assembly was pulled from decommissioned equipment, and has not been tested separately.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) SMC Pneumatics AMG250C-02BC Ambient Dryer
• (1) SMC Pneumatics AV2000-02-5D-Q Soft Start-Up Valve
• (1) SMC Pneumatics AW30-02CE-2N-B Integrated Filter/Regulator
• (1) SMC Pneumatics IS10M-30-A Pressure Switch
• (1) SMC Pneumatics AFM30-02C-2-A Mist Separator
• (1) SMC Pneumatics AMD250C-02C-T Micromist Separator
• (1) SMC Pneumatics AME250C-02B Super Mist Separator

Specifications:

• Manufacturer: SMC Pneumatics
• Model: AMG250C-02BC
  • Series: Series AMG
  • Description: Water Separator
  • Body Size: 250C
  • Port Size: 1/4" Rc
  • Rated Flow: 750 (l/min (ANR))
  • Fluid: Compressed Air
  • Max. Operating Pressure: 1.0 MPa
  • Water Removal Rate: 99%
  • Bracket: Included (AM-BM102)
  • Auto Drain: N.C. Auto-Drain
• Model: AV2000-02-5D-Q
  • Description: Soft Start-Up Valve
  • Body Size: 1/4"
  • Thread Type: Rc
  • Port Size: 1/4"
  • Pressure Gauge: None
  • Coil Voltage: 24VDC
  • Electrical Entry: Type D (DIN Terminal)
  • Light/Surge Voltage Suppressor: None
  • Manual Override: Non-Locking Push Type (Flush)
  • Flow Direction: Left To Right
• Model: AW30-02CE-2N-B
  • Description: Filter Regulator
  • M5 Thread Type
  • ¼” Port Size
  • Float Type Auto Drain
  • Square Embedded Type Pressure Gauge
  • 0.05~0.85MPa Set Pressure
  • Metal Bowl
  • W/ Drain Cock
  • Non-Relieving Type Exhaust Mechanism
  • L to R Flow Direction
  • Ambient/Fluid Temp: -5°C ~ +60°C
  • Proof Press: 1.5MPa
  • Max. Press: 1.0MPa
  • Nominal Filtration Rating: 5 μm
  • Drain Capacity: 25cm^3
  • Relief Press: Set pressure +0.05MPa [at relief flow rate of 0.1l/min (ANR)]
• Model: IS10M-30-A
  • Description: Pressure Switch w/ Spacer
  • Set Press. Range 0.1~0.4MPa
  • Proof Press. 1.0MPa
  • Max. Operating Press. 0.7MPa
  • Ambient/Fluid Temp -5°C ~ +60°C
  • 1a Contacts
  • Error of Scale ±0.05 MPa or less
  • Hysteresis Fixed 0.08 MPa or less
  • Repeatability ±0.05 MPa or less
  • IP40 Equivalent Enclosure
  • ?” Port Size
• Model: AFM30-02C-2-A
  • Description: Mist Separator
  • Body Size 30
  • Rc Thread Type
  • ¼” port size
  • Normal Close Drain Port
  • Polycarbonate Bowl
  • W/ Drain Cock
  • L to R Flow Direction
  • Ambient/Fluid Temp: -5°C ~ +60°C
  • Proof Press. 1.5MPa
  • Operating press. Range 0.05~1.0MPa
  • Nominal Filtration Rating: 0.3 μm (99.9% filtered particle size)
  • Outlet side oil mist concentration: MAX 1.0 mg/m3 (ANR) (≈0.8 ppm)
  • Rated Flow 450L/min
  • Drain Capacity 25cm^3
• Model: AMD250C-02C-T
  • Description: Micro Mist Separator
  • Body size 250C
  • Rc Thread Type
  • ¼” Port size
  • N.C. Auto Drain
  • W/ Element Service Indicator
  • Operating Press. 0.05~1.0MPa
  • Proof Press. 1.5MPa
  • Ambient/Fluid Temp. 5°C ~ +60°C
  • Nominal Filtration Rating 0.01 μm (Filtration efficiency: 99.9%)
  • Oil mist density @ Outlet: Max. 0.1 mg/m3 (ANR), (Before saturated with oil, less than 0.01 mg/m3 (ANR) ≈0.008 ppm)
  • Rated Flow: 500l/min
• Model: AME250C-02B
  • Description: Super Mist Separator
  • Rated flow 500l/min
  • Operating Press. 0.05~1.0MPa
  • Proof Press. 1.5MPa
  • Ambient/Fluid Temp. 5C ~ 60C
  • Nominal Filtration rating 0.01 μm (Filtration efficiency: 99.9%)
  • Cleanliness @ Outlet Less than 100 particles of 0.3 μm or larger per cubic foot
  • [Less than 35 particles per 10 liters (ANR)]
  • Oil Mist Density @ Outlet Max. 0.01 mg/m3 ( ANR) (≈0.008 ppm)
  • 250C Body Size
  • RC Thread Type
  • ¼” Port Size
  • Bracket Accessory

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.