SMC Pneumatics AMG250C-02BC Ambient Dryer Assembly - Parts

Manufacturer: SMC Pneumatics

Model: AMG250C-02BC

Condition: For Parts or Not Working. Comes in non-original packaging. This assembly is in good cosmetic condition, with wear from prior use.  The assembly arrived to us with a note on the soft-start valve that reads "valve is likely bad."   The assembly is being sold as-is.
The photos show the exact item(s) the buyer will receive.

Notes: This assembly was pulled from decommissioned equipment.  The assembly arrived to us with a note on the soft-start valve that reads "valve is likely bad."   The assembly is being sold as-is.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) SMC Pneumatics AMG250C-02BC Ambient Dryer
• (1) SMC Pneumatics AV2000-02-5D-Q Soft Start-Up Valve
• (1) SMC Pneumatics AW30-02CE-2N-B Integrated Filter/Regulator
• (1) SMC Pneumatics IS10M-30-A Pressure Switch
• (1) SMC Pneumatics AC30D-02CE-S-2N-B Filter Regulator/Mist Separator
• (1) SMC Pneumatics AMD250C-02C-T Micromist Separator
• (1) SMC Pneumatics AME250C-02B Super Mist Separator

Specifications:

• Manufacturer: SMC Pneumatics
• Model: AMG250C-02BC
  • Series: Series AMG
  • Description: Water Separator
  • Body Size: 250C
  • Port Size: 1/4" Rc
  • Rated Flow: 750 (l/min (ANR))
  • Fluid: Compressed Air
  • Max. Operating Pressure: 1.0 MPa
  • Water Removal Rate: 99%
  • Bracket: Included (AM-BM102)
  • Auto Drain: N.C. Auto-Drain
• Model: AV2000-02-5D-Q
  • Description: Soft Start-Up Valve
  • Body Size: 1/4"
  • Thread Type: Rc
  • Port Size: 1/4"
  • Pressure Gauge: None
  • Coil Voltage: 24VDC
  • Electrical Entry: Type D (DIN Terminal)
  • Light/Surge Voltage Suppressor: None
  • Manual Override: Non-Locking Push Type (Flush)
  • Flow Direction: Left To Right
• Model: AW30-02CE-2N-B
  • Description: Filter Regulator
  • M5 Thread Type
  • ¼” Port Size
  • Float Type Auto Drain
  • Square Embedded Type Pressure Gauge
  • 0.05~0.85MPa Set Pressure
  • Metal Bowl
  • W/ Drain Cock
  • Non-Relieving Type Exhaust Mechanism
  • L to R Flow Direction
  • Ambient/Fluid Temp: -5°C ~ +60°C
  • Proof Press: 1.5MPa
  • Max. Press: 1.0MPa
  • Nominal Filtration Rating: 5 μm
  • Drain Capacity: 25cm^3
  • Relief Press: Set pressure +0.05MPa [at relief flow rate of 0.1l/min (ANR)]
• Model: IS10M-30-A
  • Description: Pressure Switch w/ Spacer
  • Set Press. Range 0.1~0.4MPa
  • Proof Press. 1.0MPa
  • Max. Operating Press. 0.7MPa
  • Ambient/Fluid Temp -5°C ~ +60°C
  • 1a Contacts
  • Error of Scale ±0.05 MPa or less
  • Hysteresis Fixed 0.08 MPa or less
  • Repeatability ±0.05 MPa or less
  • IP40 Equivalent Enclosure
  • ?” Port Size
• Model: AC30D-02CD-S-2N-B
  • Description: Filter Regulator/Mist Separator
  • Body Size 30
  • Thread Type Rc
  • ¼” Port Size
  • Float Type Auto Drain
  • Square Embedded Type Pressure Gauge W/ Limit Indicator
  • AW+S+AFM Mounting Position
  • Metal Bowl
  • Non-Relieving Type Exhaust Mechanism
  • Pressure Gauge port size ?”
  • Ambient/Fluid temp: -5°C ~ +60°C
  • Proof Press. 1.5MPa
  • Operating Press. 0.05~1.0MPa
  • Set pressure range 0.05~0.85MPa
  • Relief Pressure: Set pressure + 0.05 MPa [at relief flow rate of 0.1 l/min (ANR)]
  • Nominal Filtration Rating: 0.3 μm (99.9% filtered particle size)
  • Rated flow: 330l/min
  • Outlet side oil mist concentration: Max. 1.0 mg/m3 (ANR) (≈ 0.8 ppm)
• Model: AMD250C-02C-T
  • Description: Micro Mist Separator
  • Body size 250C
  • Rc Thread Type
  • ¼” Port size
  • N.C. Auto Drain
  • W/ Element Service Indicator
  • Operating Press. 0.05~1.0MPa
  • Proof Press. 1.5MPa
  • Ambient/Fluid Temp. 5°C ~ +60°C
  • Nominal Filtration Rating 0.01 μm (Filtration efficiency: 99.9%)
  • Oil mist density @ Outlet: Max. 0.1 mg/m3 (ANR), (Before saturated with oil, less than 0.01 mg/m3 (ANR) ≈0.008 ppm)
  • Rated Flow: 500l/min
• Model: AME250C-02B
  • Description: Super Mist Separator
  • Rated flow 500l/min
  • Operating Press. 0.05~1.0MPa
  • Proof Press. 1.5MPa
  • Ambient/Fluid Temp. 5C ~ 60C
  • Nominal Filtration rating 0.01 μm (Filtration efficiency: 99.9%)
  • Cleanliness @ Outlet Less than 100 particles of 0.3 μm or larger per cubic foot
  • [Less than 35 particles per 10 liters (ANR)]
  • Oil Mist Density @ Outlet Max. 0.01 mg/m3 ( ANR) (≈0.008 ppm)
  • 250C Body Size
  • RC Thread Type
  • ¼” Port Size
  • Bracket Accessory

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.