Keyence FT-H20 & FT-50AWP Thermosensor Intelligent Infrared Temperature Sensor

Manufacturer: Keyence

Model: FT-H20

Condition: Used. Comes in non-original packaging. This sensor is in good condition with minor scuffs and scratches from previous use, but nothing that would affect functionality.
The photos show the exact item(s) the buyer will receive.

Notes: This sensor was removed from a decommissioned machine and has not been tested since its removal.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Keyence FT-H20 Intelligent Series Thermo Sensor
• (1) Keyence FT-50AWP Temp Sensor 12-24VDC

Specifications:

• Manufacturer: Keyence
• Model: FT-H20
• Description: infrared sensor head
  • Rated temperature range: 0 to 500 °C
  • Displayable temperature range: –50 to +520 °C
  • Measurement spot examples (distance/field diameter): 60 mm / ø8.5 mm · 120 mm / ø6 mm · 180 mm / ø14.5 mm
  • Sensing element: Thermopile
  • Wavelength range: 8 to 14 µm
  • Repeatability: ±0.5 °C
  • Emissivity correction range: ε = 0.10 to 1.99 (adjustable in 0.01 steps)
  • Ambient operating temperature: –10 to +55 °C (non-freezing)
  • Ambient humidity: 35% to 85% RH (non-condensing)
  • Vibration resistance: 10–55 Hz, double amplitude 1.5 mm, 2 hours per axis (X, Y, Z)
  • Shock resistance: 500 m/s², 10 impacts per axis (X, Y, Z), total 60 impacts
• Manufacturer: Keyence
• Model: FT-50AWP
• Description: infrared temperature-sensor amplifier
  • Power Supply: 12 to 24 V DC (±10% ripple ≤ 10%)
  • Power Consumption (Normal): 1400 mW at 12 V, 1600 mW at 24 V
  • Power Consumption (Eco mode): 1150 mW at 12 V, 1350 mW at 24 V
  • Display: Dual-display 7-segment LED (upper display red, 8 mm character height; lower display green, 5.7 mm character height), refresh rate 10/s
  • Resolution (with compatible sensor heads): 0.1 °C or 1 °C (depending on head), or 1 °C
  • Control Outputs: Two PNP open-collector outputs (selectable NO/NC), 50 mA max at 30 V, residual voltage ≤ 1 V
  • Analog Output Option: 4–20 mA (load resistance up to 260 Ω)
  • Response Time Settings: selectable among HSP, 30 ms, 100 ms, 200 ms, 500 ms, 1000 ms, 5000 ms (HSP yields max ~15 ms)
  • Environmental Operating Conditions: Ambient temperature –10 °C to +50 °C (no freezing), 35–85% relative humidity (no condensation)
  • Vibration Resistance: 10–55 Hz, double amplitude 1.5 mm, 2 hours per axis (X, Y, Z)
  • Mounting: DIN-rail mount type; main unit housing material: polycarbonate

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.