Keyence CL-P070N Optical Unit W/ CL-3000 Controller For Use w/ CL-P070 Sensor

Manufacturer: Keyence

Model: CL-P070N

Condition: Used. Comes in non-original packaging. This optical unit and controller are in good cosmetic condition, with some very minor scuffs and scratches.
The photos show the exact item(s) the buyer will receive.

Notes: This optical unit is in good working condition. A 24VDC power source was applied, and it turned on without issue. No further testing was performed.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Keyence CL-P070N Optical Unit
• (1) Keyence CL-3000 Controller

Specifications:

• Manufacturer: Keyence
• Model: CL-P070N
  • Optical Unit
  • CL-P070 Head
  • Reference Measurement Range:
    • Measurement Range ±10mm
    • Linaerity ±2.2 μm
  • High Precision Measurement Range:
    • Measurement Range ±3.0 mm
    • Linearity ±2.0 μm
  • Resolution 0.25 μm
  • Spot Diameter ø50 μm
  • Class 1 Laser Unit
  • Sampling Cycle 100/200/500/1000 μs (Adjustable 4-stage)
  • Environmental Resistance:
    • Enclosure Rating (Head) : IP67 (IEC60529)
    • Ambient Light: Target surface illuminance: 30000 lux (Incandescent lamp)
    • Ambient Temp 0 to 50°C
    • Relative Humidity 85% RH or less (no condensation)
    • Vibration Resistance:
      • Head: 10 to 57 Hz, double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
      • Optical Unit: 10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
    • Shock Resistance: 15 G, 6 ms
  • Temperature Characteristic:
    • Head: 0.005% of F.S./°C
    • Optical Unit: 0.015% of F.S./°C
• Manufacturer: Keyence
• Model: CL-3000
  • Controller
  • No. of Optical Unit Connections:
    • Controller only: 2 Units; using expansion units / relay units: 6 units
  • Interfaces:
    • EtherNet/IP,
  • Supports cyclic communication and message communication; RPI: 1 to 10,000 ms (0.5 ms units) Maximum number of connections: 8, complies with Version CT14 conformance test, Cannot be used when using PROFINET, PLC link or EtherCAT
    • PROFINET
  • Compatible with conformance class A. Cannot be used when using EtherNet/IP™,
    PLC link or EtherCAT
    • PLC-Link
  • The following PLCs are supported: Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series, Cannot be used when using EtherNet/IP™, PROFINET or EtherCAT
    • Ethernet
  • Allows for measurement data output and control I/O via no-protocol command communication with PCs and PLCs, 100Base-TX, capable of communication with CL-NavigatorN
    • USB
  • Conforms to USB 2.0 HighSpeed, capable of communication with CL-NavigatorN
    • RS-232C
  • Allows for measurement data output and control I/O via no-protocol command communication with PCs and PLCs, Baud rate: 9600 to 115,200 bps, data length: 8 bit, stop bit: 1 bit, parity: none/ even numbers / odd numbers
    • Terminal (IN)
  • 13 (supports function switching via software)
    • Terminal (Out)
  • 11 (supports function switching via software)
  • Power Voltage 24VDC ±10%
  • Max. Current Consumption: With 1 optical unit connected: 0.86 A, with 4 optical units connected: 3.3 A, with 6 optical units connected: 4.5 A
  • Ambient Temp: 0 to 50°C
  • Relatively Humidity 20% RH to 85% RH (no condensation)
  • Vibration Resistance 10 to 57 Hz, double amplitude 0.3 mm 0.01"; 2 hours each for X, Y, and Z axes
  • Monitor/Setting support software: CL NavigatorN
  • CL-NavigatorN OS environment:
    • Supported OS: Windows? 11 Pro / Windows? 10 / Windows? 7
    • CPU: Celeron Dualcore 1.7 GHz or higher
    • Memory Capacity: 4GB or more
    • Required free space on hard disk: 1GB
    • Display Resolution: XGA (1024 x 768 pixels) or higher

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.