Description

Manufacturer: Flowserve

Model: D824

Condition: New Other. Comes in non-original packaging. This pump is in fair cosmetic condition. There are smudges/scuffs/scratches outside from storage and handling, and a small amount of "surface" rust inside the pump casing.
The photos show the exact item(s) the buyer will receive.

Notes: This lot is in good working condition. We removed the pump for inspection and ran the motor for a few seconds. It sounded very nice and ran smoothly. We didn't hear any ugly bearing noises during operation or deceleration. When the pump was reassembled and spun by hand, there was no rubbing. No other testing was done.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

(1) Flowserve D824 Pump with Motor

Specifications:

Manufacturer: Flowserve (Worthington)
Model: D824
Close-Coupled Centrifugal Pump
10 horsepower
Impeller diameter: 8.5 inch
Size: 4 x 3 x 10
- 4" suction port
- 3" discharge port
- Maximum working pressure: 220 psig
- Hydrotest pressure: 330 psig
- Minimum casing thickness: 0.35"
- Casing/impeller hub clearance: 0.021-0.027"
- D800 Overhung Pump series
- Top centerline discharge
- Bottom foot under pump casing
- With drain plug
- Precision cast high-efficiency closed impeller is balanced to reduce power consumption
- Cast iron casing
- Bronze impeller
- Prominent casting marks: 959428-99, HM70, 959360-99, L146N
Motor: WEG 01018ET3E215JM-W22
- W22-series NEMA premium efficiency AC induction motor
- Product: 11766656
- Power: 10 horsepower, 7.5kW
- Designed for inverter duty with spike resistant WISE wire, meets NEMA MG1 30 & 31
- Designed for severe duty
- Marked for use in hazardous environments
- Frame: 213/5T
- Input: 3 phase AC
- 60 Hz: Service factor 1.25, Power factor 0.83, Efficiency 91.7%
- 208V, 27.4A
- 230V, 24.8A
- 460V, 12.4A
- 50 Hz, Service factor 1.15, Efficiency 88.5%
- 380V 15A
- Speed: 1765/1450 RPM
- Rated for continuous duty at 40ºC ambient
- Insulation Class F
- Ingress protection: IP55
- Totally-enclosed, fan-cooled IC411 - TEFC
- Cast iron frame
- Designed for lower noise levels and operating temperatures
- Standard NEMA MG-1
- Foot mount, F-1 mounting
- Voltage: 230/460//380V
- 4 poles, 1800 RPM synchronous speed
- Ingress protection: IP55
- Foot mount
- Without flange
- Mounting: F-1
- Manufactured in 2018

Unused spare from 2018

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.

View AllClose

Warranty Information

30-Day Guarantee

Items can be returned for any reason within 30 days of delivery.
Buyers must notify Dougdeals in writing within this period to initiate a return.
Returns must be authorized by Dougdeals and include an assigned RMA (Return Merchandise Authorization) number.
Authorized returns must be received by Dougdeals within 21 days of return authorization.

Return Shipping and Refunds

If the return is due to seller error (e.g., wrong item sent, defects not described, inauthenticity), DougDeals will cover the return shipping costs and process a complete refund, including the original shipping charges, within two business days of receiving the returned item.
If the return is due to buyer error (e.g., wrong part ordered, compatibility issues, no longer needed, found a better price), the buyer is responsible for:
- Safe return shipping.
- Return shipping costs.
- Any loss or damage during return transit.

Exclusions and Limitations

Replacement or substitute items may be provided at Dougdeals’ discretion instead of a refund.
Returned items must be in the same condition as when sent and include all components.
There is no restocking fee, but Dougdeals reserves the right to deduct costs from refunds for altered or damaged items.
Items returned due to seller error that are found to be accurately described will have return shipping deducted from the refund.
Original shipping charges are non-refundable for orders shipped internationally or to U.S. territories, Alaska, or Hawaii.

Shipping and Responsibility

International and expedited shipping costs, import fees, calibration fees, and testing fees are the buyer’s responsibility.
Any damage occurring during transit via Dougdeals-arranged third-party services or Dougdeals employee delivery must be noted in writing on the delivery receipt at the time of delivery. Failure to do so will result in the buyer assuming responsibility for damage claims.
Dougdeals is not liable for loss or damage during transit via buyer-arranged shipping services.
Customs, duties, taxes, brokerage fees, and all import-related costs for international shipments are the buyer's responsibility.

Contact Us

Headquarters:
CDN Systems | DougDeals
12510 Trails End Rd.
Leander, TX 78641

Contact via phone:
Toll free: 877-328-9236
Main office: 512-933-0081
Local Craigslist: 512-913-6048
Local eBay: 512-999-3894
Fax: 512-873-0745

Contact online:
Sales inquiries: sales@dougdeals.com
Craigslist and local sales: local@dougdeals.com
Customer support: support@dougdeals.com