Beckhoff BK9000 Bus Coupler w/ KL1114, KL1808, KL1408, KL9184, KL2408, & More!

Manufacturer: Beckhoff

Model: BK9000

Condition: Used. Comes in non-original packaging. This bus coupler and modules are in good cosmetic condition with some minor scuffs and scratches from normal use, but nothing too major or anything that would affect functionality.
Cosmetic appearance may vary slightly from pictured unit(s).

Notes: This bus coupler and module setup was removed from a decommissioned PLC setup and has not been tested since its removal.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Beckhoff BK9000 Ethernet Bus Coupler
• (4) Beckhoff KL1114 4-Channel Digital Input
• (1) Beckhoff KL1808 8-Channel Digital Input
• (4) Beckhoff KL1408 8-Channel Digital Input
• (1) Beckhoff KL9184 Power Feed Terminal
• (4) Beckhoff KL2408 8-Channel Digital Output
• (1) Beckhoff KL2808 8-Channel Digital Output
• (1) Beckhoff KL9200 Power Supply Terminal
• (1) Beckhoff KL2032 2-Channel Relay Output
• (1) Beckhoff KL9070 Bus End Terminal
• (2) Beckhoff KL2134 4-Channel Digital Output
• (1) Beckhoff KL9010 Bus End Terminal

Specifications:

• Manufacturer: Beckhoff
• Model: BK9000
• Description: Ethernet Bus Coupler
  • Number of Bus Terminals: 64
  • Max Number of Bytes Fieldbus: 512-byte input and 512-byte output
  • Digital Peripheral Signals: 512 inputs/outputs
  • Analog Peripheral Signals: 128 inputs/outputs
  • Protocol: TwinCAT ADS, Modbus TCP, Beckhoff real-time Ethernet
  • Data Transfer Rates: 10/100 Mbit/s, automatic recognition of the transmission rate
  • Bus Interface: 1 x RJ45
  • Data Transfer Medium: 4 x 2 twisted pair copper cable; category 3 (10 Mbit/s), category 5 (100 Mbit/s)
  • Power Supply: 24 V DC (-15%/+20%)
  • Input Current: 70 mA + (total K-bus current)/4, 500 mA max.
  • Starting Current: 2.5 x continuous current
• Manufacturer: Beckhoff
• Model: KL1114
• Description: Bus Terminal
  • 4-Channel Digital Input Terminal
  • Voltage: 24VDC
  • Configuration: 2-/3- Wire
  • Input Filter: 0.2 ms Typical
  • Operating Temperature: -25 to 60 °C
  • Degree Of Protection: IP20
• Manufacturer: Beckhoff
• Model: KL1808
• Description: 8-Channel Digital Input Bus Terminal, 24 V DC
  • Connection Technology: 2-wire
  • Standard Compliance: EN 61131-2 Type 1/3
  • Number of Inputs: 8
  • Nominal Voltage: 24 V DC (-15% / +20%)
  • “0” Signal Voltage: -3 … +5 V
  • “1” Signal Voltage: 11 … 30 V
  • Typical Input Filter (Debounce): 3.0 ms
  • Typical Input Current: 3 mA (Type 3)
  • Current Consumption from K-bus: 15 mA typical
  • Current Consumption from Power Contacts: 2 mA + load
  • Electrical Isolation: 500 V (between K-bus and field potential)
  • Process Image: 8 inputs (bit width = 8)
• Manufacturer: Beckhoff
• Model: KL1408
• Description: 8-channel digital input
  • Connection technology: 1-wire
  • Specification: EN 61131-2, type 1/3
  • Number of inputs: 8
  • Nominal voltage: 24 V DC (-15%/+20%)
  • “0” signal voltage: -3…+5 V (EN 61131-2, type 1/3)
  • “1” signal voltage: 11…30 V (EN 61131-2, type 3)
  • Input filter: typ. 3.0 ms
  • Input current typ.3 mA (EN 61131-2, type 3)
  • Current consumption K-bus: typ 5 mA
  • Current consumption power contacts: typ 2 mA + load
  • Electrical isolation: 500 V (K-bus/field potential)
  • Bit width in the process image: 8 inputs
• Manufacturer: Beckhoff
• Model: KL9184
• Description: Bus End Terminal
  • Status: Power Feed Terminal
  • System: Beckhoff KL Bus Terminal System
  • Function: Logic termination for K-bus
  • Installation Position: Any
  • Current Load: Max 10 A
• Manufacturer: Beckhoff
• Model: KL2408
• Description: 8-channel digital output
  • Connection technology: 1-wire
  • Number of outputs: 8
  • Nominal voltage: 24 V DC (-15%/+20%)
  • Load type: ohmic, inductive, lamp load
  • Max. output current: 0.5 A (short-circuit proof) per channel
  • Short-circuit current: < 2 A
  • Breaking energy: < 150 mJ/channel
  • Reverse voltage protection: yes
  • Electrical isolation: 500 V (K-bus/field potential)
  • Current consumption power contacts: typ. 60 mA + load
  • Current consumption K-bus: typ. 18 mA
  • Bit width in the process image: 8 outputs
• Manufacturer: Beckhoff
• Model: KL2808
• Description: 8-Channel Digital Output Bus Terminal, 24 V DC, HD
  • Connection Technology: 2-wire
  • Number of Outputs: 8
  • Nominal Voltage: 24 V DC (-15% / +20%)
  • Load Types Supported: Ohmic, inductive, lamp
  • Maximum Output Current: 0.5 A per channel (short-circuit proof)
  • Short-Circuit Current: < 2 A
  • Breaking Energy per Channel: < 150 mJ
  • Reverse Voltage Protection: Yes
  • Electrical Isolation: 500 V between K-bus and field potential
  • Current Consumption (K-bus): Typical 20 mA
  • Current Consumption (Power Contacts): Typical 15 mA + load
  • Process Image Bit Width: 8 outputs
• Manufacturer: Beckhoff
• Model: KL9200
• Description: Potential Supply Terminal
  • Current load: ≤ 10 A
  • Integrated fine-wire fuse: …6.3 A
  • Power LED: green
  • Defect LED: red
  • Nominal voltage: 24 V DC
• Manufacturer: Beckhoff
• Model: KL2032
• Description: Digital Output Terminal
  • Channels: 2
  • Voltage Rating: 24 VDC
  • Current Rating: 0.5 A
  • Features: Reverse Voltage Protection
  • Connection: 4-Wire
  • Electrical Isolation: 500V
  • Operating Temperature: -25 to 60 °C
  • Load Type: Ohmic, Inductive, Lamp Load
  • Degree Of Protection: IP20
• Manufacturer: Beckhoff
• Model: KL9070
• Description: Bus End Terminal for KL/KM Series, K-Bus Termination
  • Power Supply: Via power contacts
  • K-Bus Termination: Yes (required at end of terminal block)
  • Function: Ends internal K-bus communication chain
  • Required Placement: Must be last terminal in series
  • Electrical Isolation: Yes, isolates K-bus from unused terminals
  • Current Consumption (K-bus): Typically < 10 mA
• Manufacturer: Beckhoff
• Model: KL2134
• Description: Bus Terminal
  • 4-Channel Digital Output
  • Voltage Rating: 24VDC
  • Connection: 2-/3- Wire
  • Electrical Isolation: 500V
  • Short-Circuit Current: <2A
• Manufacturer: Beckhoff
• Model: KL9010
• Description: End Terminal
  • K-bus, looped through: –/yes
  • Special features: end terminal for bus communication

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.