Alio 6-D AI-LM-10000-XY-P-SL 100mm Linear Translation Stage With Motors, Drives

Manufacturer: Alio

Model: AI-LM-10000-XY-P-SL

Condition: Used. Comes in non-original packaging.  This lot is in good cosmetic condition with one minor exception: One of the upper mounting surfaces (where equipment used to be mounted) had minor oxidation, which we polished off with a non-abrasive scrubbing pad.  The finish is still bright, but not as bright as the other mounting areas.  There are a few scuffs and scratches here and there, but nothing to affect operation.
The photos show the exact item(s) the buyer will receive.

Notes: This stage is in good working condition.  Each axis moves extremely easily and smoothly with light finger pressure (or gravity, on our photographer's slanted bench) in both directions. All the electronic boxes on the AI-CNTL module had solid green lights when power was applied, as shown.  Both power supply fans ran.  NO other testing was done.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Alio AI-LM-10000-XY-P-SL X/Y Stage
• (1) Alio AI-CNTL-A222P10-24V6A-48V10A Control 

Specifications:

• Manufacturer: Alio
• 6-D series X-Y Linear Translation stage with motor drives and motion controls
• Stage model: AI-LM-10000-XY-P-SL
  • Linear translation stage
  • Travel: 100 x 100 mm (+/-50mm each axis)
  • Metrology-grade precision
  • Crossed-roller linear motion guide bearings: NB type NV3225 slide ways
  • Linear displacement accuracy rating: +/-3 µm
  • Straigness rating: +/-1 µm
  • Bi-directional repeatability < +/-30 nanometers
  • Renishaw non-contact linear encoder, TONiC series TI0000A00A inerface
  • Resolution: 5 nm
  • Maximum velocity: 1 m/s
  • Motors: P/N 210069
    • Ironless, brushless servomotor
    • Frictionless motion,
    • Magnetic coupling
  • Payload maximum: 25 kg
  • MTBF rating: 100,000 hrs
  • Dimensions excluding wire holding fixtures: 244 x 244 x 80 mm
• Controller assembly: AI-CNTL-A222P10-24V6A-48V10A
  • Mounted motion controller, motor drives, and power supplies
    • SPiiPlusEC Master motion Control: ACS SP+EC-0200003?NNNDNBNN (hard to read)
      Up to 2 axes of control
      Up to 10 ACSPL+ buffers/tasks
      Communication: Serial and EtherNET (EtherCAT compatible)
  • Motor Drive: ACS UDMnt2C220N0U
    • Drive up to 2 axes
    • Current: 10A continuous, 20A peak
    • (2) 500kHz sin/cos encoder channels
    • Maximum output power @ 80VDC: 640 Watts continuous, 1280 Watts peak
    • Peak current time: 1 second
    • Digital current control with field oriented control and space vector modulation
    • PWM Frequency: 40kHz
    • Protections: over/under voltage, short circuit (to ground and phase to phase), Over current, over temperature
    • Communication: (2) EtherCAT ports, in and out, RJ45
  • Mean Well SP-480-48 Power Supply, 48V 10A output
    Mean Well SP-150-24 Power Supply, 24V 6.3A output

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.