Site Information


 Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7

TMC 12' x 5' x 18" Cleantop Optical Breadboard Table, Micro-g Vibration Isolator

Current Stock:

Product Description

Manufacturer: Technical Manufacturing TMC

Model: 16-134-00

Condition: Used. This table is in fair cosmetic condition. There are lots of scuffs/scratches from prior use, including a section with deep linear scratches from what looks like use as a cutting board (?) but these do not affect function as an optical breadboard and may be sanded flat again.  The bottom has lots of scratches.

Please NOTE: this item weighs several thousand pounds and is difficult to maneuver. Please consider how you will get this into your facility before placing a bid! The photos show the exact item(s) the buyer will receive.

Notes: This table is in good working condition. When air was put to the inlet, eventually all four isolators lifted the table. The regulators automatically compensated for changing loads to keep the table at the set height. No air leaks were heard. No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown.


  • (1) TMC 12' x 5' x 18" Cleantop Optical Table
  • (4) TMC Micro-g air isolation legs
  • Associated plumbing and air regulator


  • Manufacturer: Technical Manufacturing Corporation (TMC)
  • CleanTop optical breadboard table with Micro-g pneumatic vibration isolating legs
  • Active height control with automatic compensation for load changes
  • Isolate your delicate equipment from vibrations transmitted through the floor
  • 100% air-powered, no electricity required!
  • (3) Isolation zones
  • Adjustable height (about 1/2" range)
  • Top dimensions: 18' x 5' x 18"
  • Optical breadboard: 1/4-20 on 1" centers grid
  • Laserport (big hole/penetration) on one end: 6' x 1" x 18" with steel lining
  • Optical breadboard surrounds bottom of laserport
  • Magnetic stainless steel top
  • Black painted steel bottom
  • Legs: TMC 16-134-00 Micro-g gimbal piston isolators
  • Leg height: 18" when deflated
  • 14" square base footprint, 8-1/2" square legs
  • Bases have threaded holes for attaching tie bars or accessories
  • EXTREMELY heavy

Pneumatic vibration reduction/isolation table is tested, in Good working condition.

30 Day Guarantee

  • Guaranteed to be as described
  • Can be returned for flaws or malfunctions that were not disclosed
  • See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.

Other Details


Find Similar Products by Category