THK 2.6m Ballscrew WTF 3060-3 with Linear Rail HSR25 and Bearings 2.32m Travel

Product Description

Manufacturer: THK

Model: WTF

Condition: Used. Comes in non-original packaging. This lot is in Good cosmetic condition overall with only minor blemishes from prior use. There is dusty residue as well as a bit of white grease leftover from the last owner. There are some light scuffs/scratches on the ends of each piece. One of the keys is missing from one end of the screw. The photos show the exact item(s) the buyer will receive.

Notes: These were removed from decommissioned equipment and just given a quick check to be sure the bearings and nut move easily with light hand pressure. NO other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

(1) THK HSR25 Linear rail 259.5cm
(1) THK WTF 3060-3 Ballscrew 262cm

Specifications:

Manufacturer: THK
Ballscrew and linear rail with ball bearing pillow blocks
Travel: 232cm
Tactical black coating for extra cool points
Linear motion guide: HSR25 series
- Linear way rail length: 2595 mm
- Length of ball bearing blocks each: 7.7 cm
- Approximate length of both bearing blocks with enough room to access grease fittings: 18cm
- Mounting orientation: any (load ratings are equal all directions)
Ballscrew: WTF 3060-3
- Rolled screw
- Large lead: 6 cm/turn
- Screw length: 262 cm
- Distance between end bearings: 245 cm
- Nut length: 12.3 cm
- Maximum nut travel (between end bearings): 232 cm
- 8 bearing grooves/races on screw
- Lead: 6 cm
- No preload
- Shaft diameter: 30 mm
- Lead: 60 mm
- Thread minor diameter: 26.4 mm
- Number of loaded circuits: 2 x 1.65 turns
- Basic load rating: 14.5kN Ca
- Rigidity: 310N/µM
- (2) End bearings on each end
- 17mm end diameter with (1) key