Site Information

CONNECT WITH US

 Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

Thermal Engineering TEA WT-100 Vertical Laboratory Wind Tunnel 8"Cube Test Area

$1,627.29
SKU:
W15D011
Current Stock:
1
Quantity:

Product Description

Manufacturer: Thermal Engineering Associates TEA

Model: WT-100

Condition: Used. Comes in non-original packaging. This tunnel is in Fair cosmetic condition with only minor blemishes from prior use. There are some stains on the bottom and scuff/scratches here and there. A couple of screws are missing from the test chamber covers. The cap is missing from the "up" button but the switch works fine still. The photos show the exact item(s) the buyer will receive.

Notes: This wind tunnel is in Good working condition. We used a handheld anemometer inserted as shown in photo #4 to verify that airflow varied from about 100FPM (lower scale) at minimum velocity, to 1000FPM (upper scale) at maximum velocity. The digital readout at those speeds showed about 700 and about 6000, which is a little high for meters/second and may need to be calibrated.  The fan is relatively quiet in operation. No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

  • (1) TEA WT-100 Wind Tunnel
  • (2) Blank test area side panels
  • (1) Test area side panel with an electrical connector glued on

Specifications:

  • Manufacturer: Thermal Engineering Associates, Inc.
  • Model: WT-100
  • Wind tunnel
  • Testing volume: 8" x 8" x 8"
  • Air velocity range: 100 linear feet/minute (0.5m/s) to 1000 lf/m (5m/s)
  • Fans run at a constant speed for efficiency and low noise
  • Air velocity adjusts by moving exhaust vanes
  • Pushbutton up/down airspeed control
  • Digital airspeed readout
  • Removable opposite panels on testing area
  • Vertical orientation saves floor space
  • Footprint: 3' x 2' for unit, 4' x 3' including clearances (about 7' tall)
  • Air exhaust at top
  • "Stacked straws" type of air alignment sections top and bottom
  • Power requirement: 120V 50/60Hz 7A
  • Meets EIA/JEDEC JESD51-6 (Integrated circuit thermal test method environmental conditions - forced convection (moving air))

Tested, working. May need calibration (?)

30 Day Guarantee

  • Guaranteed to be as described
  • Can be returned for flaws or malfunctions that were not disclosed
  • See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.

Other Details

Condition:
Used

Find Similar Products by Category