Site Information

CONNECT WITH US

 Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

Precision Valve & Automation Shuttle Conveyor 60cm x 120cm Belt Edge Open Center

$699.99
SKU:
T28D005
Current Stock:
1
Quantity:

Product Description

Manufacturer: Precision Valve & Automation PVA

Model: SHC-6M-48i-HS-RL-2633

Condition: Used. This conveyor is in Fair cosmetic condition.  There are lots of scuffs/scratches including to the metal, as well as residues from old adhesive labels. The top window/access panel is very heavily scratched and the view through is not perfectly clear.  There are several holes in the sides where things used to be mounted to the case, and small bent areas on the edges of the openings.  A few bolt heads are visibly corroded and a few cover screws are missing.
The photos show the exact item(s) the buyer will receive.

Notes: This conveyor is in Good working condition.  At power-on it easily passed touchscreen calibration and gave an error about needing a new battery, which was able to be dismissed.  We watched it go through cycles of accepting a board and moving to the opposite end of the shuttle (as expected).  It did not try to eject a board but may have been waiting on a downstream signal that was not present on the SMEMA connector.   Note that the width adjustment screen gives a range of "76.2 to 999.9" but the maximum is longer than the entire unit, so we are not able to state the maximum width of the conveyor.  The touchscreen works. While poking around in the touchscreen we did run into a password entry prompt, but we do not have the password if one is required.  No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

  • (1) CTI SHC-.6M Shuttle Conveyor

Specifications:

  • Manufacturer: Conveyor Technologies, Inc.
  • Model: SHC-6M-48i-HS-RL-2633
  • Shuttle conveyor
  • Floor-level shuttle to merge products between parallel lines
  • Conveyor movement has a linear slide for precise positioning
  • Optional servo-drive for slide motion is fitted
  • Totally enclosed with interlocked doors for safety
  • Access doors on top
  • PLC controls with SMEMA cable connections
  • Board-edge clearance: 3mm
  • Minimum conveyor width: 76.2mm
  • Manual width adjustment
  • Conveyor length: 60cm
  • Shuttle Length: estimated 48" (120cm), hard to measure
  • Power: 120V 60Hz 4.2A


30 Day Guarantee

  • Guaranteed to be as described
  • Can be returned for flaws or malfunctions that were not disclosed
  • See complete terms

Other Details

Condition:
Used

Find Similar Products by Category