SP Scientific XE75 Temperature Cycling System FTS Air-Jet Cooler/Heater - Noisy B

SKU:
S08D010
Shipping:
Calculated at Checkout
  • SP Scientific XE75 Temperature Cycling System FTS Air-Jet Cooler/Heater - Noisy B
  • SP Scientific XE75 Temperature Cycling System FTS Air-Jet Cooler/Heater - Noisy B
  • SP Scientific XE75 Temperature Cycling System FTS Air-Jet Cooler/Heater - Noisy B
  • SP Scientific XE75 Temperature Cycling System FTS Air-Jet Cooler/Heater - Noisy B
  • SP Scientific XE75 Temperature Cycling System FTS Air-Jet Cooler/Heater - Noisy B
  • SP Scientific XE75 Temperature Cycling System FTS Air-Jet Cooler/Heater - Noisy B
$399.97

Description

Manufacturer: FTS Systems

Model: XE752

Condition: For Parts or Not Working. This system is in Fair cosmetic condition.  There are lots of small scuffs/scratches/dings especially in the bigger cabinet that make it look a little rough from close up. The photos show the exact item(s) the buyer will receive.

Notes: This unit makes a strange noise when air is flowing through it, different to all the other similar items we have in house.  Heating works fine, and cooling also works but cooling times are about 150% as long as the specified 20 seconds from 125 to -55 degrees.  No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

  • (1) Refrigeration Unit with Output Hose attached
  • (1) Controller
  • (1) Connection Cable

Specifications:

  • Manufacturer: FTS Systems
  • Model: XE752_01
  • Air-Jet XE Precision Temperature Cycling System
  • Temperature range: -75ºC to +225ºC
  • Thermal forcing unit fits on the benchtop
  • Self-contained only requires dry air, NO nitrogen required!
  • Monitor and control from an internal or external (sample-mounted) thermocouple
  • Save multi-step profiles in the Watlow F4 digital controller
  • RS-232 or GPIB (IEEE_488) programmability to interface with automated test equipment
  • Flow rates ajustable from 1.0 to 4.0 SCFM (2.0 SCFM gives best temperature control range)
  • Small enough to be rack-mounted
  • Refrigeration unit dimensions: 24" x 15" x 16"H (approximately)
  • Built-in overtemperature safety
  • Built-in low-flow safety
  • PID digital controller
  • Rated for +/-0.5º stability and repeatability (please read testing notes!)
  • Control unit dimensions: 10" x 8" x 7" (approximately)
  • Transition specifications @ 2SCFM (please read testing notes!)
    • -55ºC to +125ºC <10 seconds
    • +125ºC to -55ºC <20 seconds
  • Power: 120V 60Hz 20A
  • Requires clean dry air, 7SCFM with -80ºC dewpoint
  • NO thermal caps (sample enclosures) are included

Makes a funny noise when running. 120V AC power

AS-IS

  • No returns - No refunds - No exchanges
  • By purchasing this item, you are agreeing to not seek reimbursement should the item not function to the manufacturer's specifications.
  • Read the notes carefully to ensure you are buying something you can use
  • See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.

View AllClose

Additional Information

Condition:
For Parts or Not Working
View AllClose