Espec EZO30-WA 10-60C Temperature/Humidity Stability Environmental Chamber-Parts

Manufacturer: Espec

Model: EZO30-WA

Condition: For Parts or Not Working. This oven is in Fair cosmetic condition. There are scuffs/scratches in the stainless all over, and some adhesive label residues - but nothing that will affect function.  The rear top panel is loose on the bottom where the drain hose doesn't fit right.  The mount for the capacitor on the compressor is broken, so the capacitor sits on top of the chamber loose. This is being sold AS/IS.

Note: We do not have the key for the door lock. The photos show the exact item(s) the buyer will receive.

Notes: This chamber is in PARTIAL working condition. We were able to run it all the way to the maximum high temperature and humidity.  When it was set to lower both, the humidity increased to 97% and the controller gave a failure alarm 21.  We turned off the humidity control and let the chamber cool down, which it did all the way to 10º.  We found in later testing that it is able to increase the humidity, but NOT able to decrease humidity. It leaks water on the roof of the chamber instead of lowering the humidity, and the humidity reading never falls.  During high-humidity operation, there was significant moisture buildup on the door (we could not tell if it was in the door also). The fan and refrigeration run relatively quietly. We are not sure what-all may be wrong with this chamber. The door closes very securely, to the point of being hard to open. No other testing was done. This is being sold AS/IS. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Espec EZO30-WA

Specifications:

•  Manufacturer: ESPEC
• Model: EZO-WA
• Environmental Stability Chamber
• Suitable for ICH Q1A conditions:
  •  Long term: 25°C/60%, 30°C/65%
  •  Intermediate: 30°C/65%
  •  Accelerated: 40°C/75%
• Interior volume: 800 liters (28.1 cubic feet)
• Interior dimensions: 27.5" x 27.8" x 63.5"H
• Exterior dimensions: 34" x 40" x 94"
• Temperature range: 10 to 65 ºC
• Humidity range: 20% to 90% RH, temperature-dependent
• Power requirement: 208/230V 1-phase 4-wire 60Hz 24A
• Temperature fluctuation at sensor: +/-0.25 ºC
• Humidity fluctuation at sensor: +/- 2%
• Single-stage refrigeration
• Meets ICH Q1A general case guidelines for pharmaceutical stability testing
• Frost-free continuous refrigeration
• Heated full-view window
• Horizontal airflow
• (3) Adjustable solid shelves with lips to protect against spills
• Designed for flush installation on all sides
• Manufactured in 2013
• NOT working right, please read the testing notes!

AS-IS

• No returns - No refunds - No exchanges
• By purchasing this item, you are agreeing to not seek reimbursement should the item not function to the manufacturer's specifications.
• Read the notes carefully to ensure you are buying something you can use
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.