Site Information


 Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

Epilog 8000 Mini 50 Watt Laser Engraver w/24" x 12" Perforated Printing Bed 2016

Current Stock:

Product Description

Manufacturer: Epilog

Model: 8000 Laser System

Condition: Used. This machine is in Fair cosmetic condition overall. There are scuffs/scratches on the paint outside as well as minor residues from prior use.  The prior owner had various items mounted outside and a few extra holes remain.   The top-panel stickers are peeling and torn on the corners.  The laser mirrors were recently cleaned.  The gantry lens has some scratches but it still images okay.  The previous owner found the autofocus got in their way, so they removed the tip of the plunger; aotofocus will not work unless you replace that piece.  There is an air control baffle missing from the front of the work area.  The buttons on the main control panel on this unit have some wear that causes commonly-used buttons to shine when the light hits it just wrong. The photos show the exact item(s) the buyer will receive.

Notes: This engraver is in Good working condition. We were able to run a few test prints without difficulty on a wooden plate. The alignment, sensors and air assist all work as expected.  Focus was set manually using the included tool.  No other testing was done.  The rotary attachment was not tested.  The included software is a copy of the drivers we used to successfully test this with our own computer (computer not included).

Please NOTE: the laser tube is OLD and may require replacement sooner rather than later. No manuals, cords/cables, or additional items are included if not listed or shown.


  • (1) Epilog Mini 50 Watt Laser Engraver
  • (1) Rotary engraving attachment
  • (1) Laser Alignment Target
  • (1) Laser Focusing Bracket
  • (1) Power Cable
  • (1) Ethernet Crossover Cable
  • (1) Software disc


  • Manufacturer: Epilog Corporation
  • Model: 8000 Laser System
  • Mini series laser engraver
  • 24x12" working area
  • 5" maximum material thickness
  • 50 watts laser
  • Connect to your PC by USB or Ethernet
  • Power requirement: 100-240V 47-63Hz 15A
  • Compressed air is required for the air assisted blow-off feature
  • Perforated stainless steel cutting bed with crumb-catcher tray beneath
  • Clear glass wide-opening top
  • Fold-down front loading door
  • Safety interlocks on doors
  • Rear-panel ventilation port
  • Manufactured: 2015 (Laser tube: 2016)

Tested, working engraver. Minor parts missing.

30 Day Guarantee

  • Guaranteed to be as described
  • Can be returned for flaws or malfunctions that were not disclosed
  • See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.

Other Details


Find Similar Products by Category