Model: 8000 Laser System
Condition: Used. This machine is in Fair cosmetic condition overall. The worst blemish is the Play/Pause/Back buttons on the control panel are delaminating and a little ugly. There are scuffs/scratches on the paint outside as well as minor residues from prior use. There are small scratches on the lens. The prior owner had various items mounted outside and some extra holes remain. The "crumb catcher" removable tray is missing. The top-panel stickers are peeling and torn on the corners. The previous owner found the autofocus got in their way, so they removed the tip of the plunger; autofocus will not work unless you replace that piece. The main gantry mirrors, lens and manual focus support were all recently replaced.
The photos show the exact item(s) the buyer will receive.
Notes: This engraver is in Good working condition. We were able to run a few test prints without difficulty on a wooden plate. The alignment, sensors and air assist all work as expected. Focus was set manually using the included tool. Prints were made using the Ethernet connection; USB connection for these printers is reputed to be flaky/not as good and was not tested. No other testing was done. The rotary attachment was not tested. The included software is a copy of the drivers we used to successfully test this with our own computer (computer not included).
Please NOTE: The date indicated on the laser tube is OLD and it may require replacement sooner rather than later.
No manuals, cords/cables, or additional items are included if not listed or shown.
- (1) Epilog Mini 50 Watt Laser Engraver
- (1) Rotary engraving attachment
- (1) Laser Alignment Target
- (1) Laser Focusing Bracket
- (1) Power Cable
- (1) Ethernet Crossover Cable
- (1) Software disc
- (1) Rear Panel Vent Tube Adapter
- Manufacturer: Epilog Corporation
- Model: 8000 Laser System
- Mini series laser engraver
- 24x12" working area
- 5" maximum material thickness
- 50 watts laser
- Connect to your PC by USB or Ethernet
- Power requirement: 100-240V 47-63Hz 15A
- Compressed air is required for the air-assisted blow-off feature
- Perforated stainless steel cutting bed
- Clear glass wide-opening top
- Fold-down front-loading door
- Safety interlocks on doors
- Rear-panel ventilation port
- Manufactured: 2018 (Laser tube: 2018)
30 Day Guarantee
- Guaranteed to be as described
- Can be returned for flaws or malfunctions that were not disclosed
- See complete terms
CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.