Site Information

CONNECT WITH US

 Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8

Ametek R-100 Mansfield & Green Deadweight Pressure Tester 5lbs to 10,000lbs

$1,999.99
SKU:
U05D007
Current Stock:
1
Quantity:

Product Description

Manufacturer: Ametek

Model: R-100

Condition: Used. Comes in non-original packaging. This lot is in Fair cosmetic condition, with lots of minor scuffs/scratches from prior use.  There is a bit of oil all over most of the tester parts.  The instruction manual (not shown) is completely soaked in oil.  The cases have adhesive tape residue on them from previous attempts to tape them closed, as well as scuffs and scratches all over.  The gauge is one we had bouncing around the shelves and it has a cracked crystal but still works. The photos show the exact item(s) the buyer will receive.

Notes: This set is in Good working condition.  We were able to make measurements on both ranges (see last 2 images) with no difficulty.  High and low volume settings on the pump both work.  No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

  • (1) Mansfield & Green R-100 Pressure Tester
  • (1) WG-89 1/10 Piston
  • (1) WG-92 1/100 Piston
  • (4) Mansfield & Green WG23 Weights
  • (4) Mansfield & Green WG25 Weights
  • (1) Mansfield & Green WG26 Weight
  • (8) Mansfield & Green WG27 Weights
  • (2) Weight cases
  • (1) Tester case
  • Oily instruction manual

Specifications:

  • Manufacturer: Ametek Test & Calibration Instruments (Mansfield & Green Division)
  • Model: R-100
  • Dead Weight Pressure Tester
  • Ranges:
  • 10-1000PSI in 5lbs. increments
  • 100-10,000 PSI in 50lbs. increments
  • Primary standard, accurate to 0.1% of indicated reading
  • Suitable for use as a calibration standard for gauges, transducers, recorders, etc.
  • Hand-operated hydraulic pump rapidly builds pressure
  • Uses AAA tester oil
  • Suspended weights have low center of gravity, minimizes side loads on tester
  • Weights are hard, non-magnetic alloy
  • Dual pistons extend pressure measurement range with common weight set
  • With additional parts not included, can be used for gauge comparator testing
  • Capable of NIST traceable calibration (last calibrated 2008)

Tested, working dead weight tester. Includes cases.

30 Day Guarantee

  • Guaranteed to be as described
  • Can be returned for flaws or malfunctions that were not disclosed
  • See complete terms

Other Details

Condition:
Used

Find Similar Products by Category