ABB EL3020 Continuous Gas Analyzer Monitor IPA 0-350% LEL w/ URAS26 Module Asea

Product Description

Manufacturer: Asea Brown Boveri ABB

Model: EL3020

Condition: Used. Comes in non-original packaging. This analyzer is in Good cosmetic condition with only minor blemishes from prior use. The worst is a big scratch on the top cover. The photos show the exact item(s) the buyer will receive.

Notes: This unit is in Good working condition. The analyzer powers on and responds to button presses. It was able to successfully complete an automatic self-calibration routine. The sensor gave a reading of <4% LEL which decreased a little when shop air was run through the input, stabilizing at the previous reading when the air flow was stopped. A small amount of alcohol was placed in a hose and air was blown over it, into the inlet fitting; this caused the reading to spike over 200% LEL. We removed the hose and ran air through the sensor again, and the reading quickly fell back down to <4%. We are not a calibration lab, and calibration of safety measurement equipment (like this) is recommended before putting it into service. No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

(1) ABB EL3020 Continuous Gas Analyzer

Specifications:

Manufacturer: ABB
Model: EL3020
EasyLine Continuous gas analyzer
Process gas and/or emissions samples continuous monitoring
With standard URAS26 (IR) measurement module
Currently configured to measure 1 gas (IPA) in % LEL
2x Analog Outputs, 0/4-20mA
4x Digital Inputs & Outputs, 30V 1A max.
19" rack mount 3U package
Power: 100-240V 50-60Hz 2.2A
Sample gas conditions:
- Temperature: 5ºC to 55ºC
- Positive pressure: 2 to 500hPa
- Flow: 20 to 100l/h
With appropriate lines, suitable for flammable gases in non-hazardous environment
NOT suitable for corrosive gases
Bolt-down brackets are mounted to the 19" rack mounting tabs