Site Information


 Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

5 meter 16.4'White Flat Belt Conveyor 17.5" Wide 230VAC 3 Phase 1 HP Motor Steel

Current Stock:

Product Description

Manufacturer: Polvige


Condition: Used. This conveyor is in Fair cosmetic condition.  There are lots of places where the belt wore through the paint.  This was used in a pillow factory and there is pillow fluff waiting to be discovered in some of the nooks and crannies.  There is a strip of duck tape covering a seam between the top and the frame, where the frame is spot-welded and a paper could slip through the gap if it were left uncovered.  That side of the conveyor frame looks like it was added-onto to increase the width.  Sorry, without a model number we are not able to provide detailed specifications on this unit! The photos show the exact item(s) the buyer will receive.

Notes: This conveyor is in Good working condition.   The end-roller bearings on the non-drive end of the conveyor groan at low speed and creak once per revolution at low speed; we greased the bearings but the noise persists, we are not sure why.  When we pressed the reverse direction button, the controller gave an Err message on the display.  The lowest speed the unit would reliably start is a setting of 32, but with no load it would run if adjusted down to 26, at which point hand pressure could stop the belt.  No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown.


  • (1) 5m Flat Belt Conveyor


  • Manufacturer: Polvige Technologies Inc.
  • Flat belt conveyor
  • Conveyor length: approximately 5 meters (197 inches, 16.4 feet)
  • Belt width: 18"
  • Height: 32" non-adjustable
  • Power requirement: 1phase 120/240V 50-60Hz 9.2/4.6A
  • Belt is supported by steel plate under entire span
  • Chain driven
  • Belt surface: coarse white cloth
  • Direction: Right to Left (top moves away from the controller end)
  • Variable speed, simple button press adjustment
  • Speed range: 3.5 to 7.8 inches per second
  • Motor drive: Lenze ACTech type ESV371N01SXB, input 1phase 120/240V 50-60Hz 9.2/4.6A, output 3phase variable voltage and frequency, 0.5HP
  • Motor: Nidec US Motors Cat.No. U12S2ACR 1/2HP
  • Gearhead: Grove Flexaline Model BMQ213-3 , ratio 40:1, input 0.469HP

30 Day Guarantee

  • Guaranteed to be as described
  • Can be returned for flaws or malfunctions that were not disclosed
  • See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.

Other Details


Find Similar Products by Category