Site Information


 Loading... Please wait...

Konzon MTS-II Magnetic Powder ZF100B Dynamometer 100Nm 1000RPM Motor Test System

Current Stock:

Product Description

Manufacturer: Konzon

Model: MTS-II-1001

Condition: Used. This lot is in Good cosmetic condition with only minor blemishes (scuffs/scratches) from prior use.  The (glass) front door on the control box has come loose, and will need fresh silicone to hold it in position, and there is some residue in the top (inlet) cooling water fitting (bottom, photo #5).  From the label and cables in the back of the control box, we think this is for testing DC motors. The photos show the exact item(s) the buyer will receive.

Notes: We connected the two cables that mate with the dynamometer, and powered on the controllers. When we spun the input shaft of the dyno, the speed indication gave a reading (middle, photo #4). Turning the shiny knob on the right side of the top control box made the brake excitation "A" indication increase, and the input shaft of the dynamometer had more resistance and then was firmly held in place, and a torque reading was shown on the controller display (bottom, photo #4). The input shaft spins smooth and easy with power off. We are not expert in the use of this equipment, and no other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown.


  • (1) Konzon ZF100B Dynamometer on mounting table
  • (1) MTS-11-1001 Control Box
  • (1) Sliding table for mounting motors
  • (1) Motor mounting plate
  • (1) Long bar, mounts on the input shaft


  • Manufacturer: Konzon (Guang Zhong Electrical)
  • Motor testing system
  • For low speed, high torque motors
  • Load of the motor can be freely adjusted
  • Can test/measure the following at no load, at measuring points, and at locked rotor:
    • Voltage
    • Current
    • Input power
    • Torque
    • Speed
    • Output power
    • Efficiency
  • Intended to be connected to a Windows 98 computer (not included, no software included)
  • Dynamometer Model: ZF100B
    • ZF-series magnetic powder dynamometer
    • Maximum speed: 1000RPM
    • Maximum torque: 100N.m
    • Operating power: 3000W maximum, 800W continuous
    • No residual magnetism
  • Control box: MTS-11-1001
    • Power: 220V AC 1phase (labels on electronics inside say 50/60Hz)
    • Test range: up to DC 200V up to 200A
    • Includes:
      • Absorption Dynamometer Controller KZQ-IIB
      • Power Analyzer ZTV-I
      • Contactors and relays
  • Manufactured: 2012
  • ALL markings are in Chinese
  • Without a motor controller/power source, this is an INCOMPLETE testing system

30 Day Guarantee

  • Guaranteed to be as described
  • Can be returned for flaws or malfunctions that were not disclosed
  • See complete terms

Other Details


Find Similar Products by Category