Graco Dispensit Titan 200 High Pressure Cartridge Feed System Sealant Adhesives Broken Handle

Manufacturer: Graco

Model: Titan 200

Condition: Used. Comes in non-original packaging.  It has scuffs and scratches from normal use. Cosmetic appearance may vary slightly from pictured unit(s).

Notes: This item was not fully tested, since we do not have the proper resources.  We connected a pneumatic line to this item and were able to raise and lower the cylinder assembly with no problems.  The cartridge chamber tilts forward, when the cylinders are in the raised position.  This makes it easy to change out the cartridges.  The valve handle is broken off (indicated by the arrow) though the stem is fine and it still can be opened/closed with a pair of pliers.  No further testing was performed. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Graco Dispensit Titan 200 High Pressure Cartridge Feed System

Specifications:

• Manufacturer:  Graco
• Model:  Titan 200
• 20 Ounce Cartridge Feed System
• Used for High Viscosity and / or Abrasive Materials
• Pneumatic Cartridge Ram Mounted On A Tilting Cartridge Frame
• Requires non lubricated plant air up to 80 PSI to operate the pneumatic cartridge ram
• Pneumatic cartridge ram with a 2.5:1 power factor can
  transfer material up to 200PSI.
• Selection Switch:Lower, Neutral, Raise
• Dispensit
• Max. Air Pressure:  5.5 bar (79.77 psi)
• Pneumatic Hose Connection:  Press to Connect
• Applications:
  • Sealants
  • Adhesives
• Cylinders:
  • Manufacturer:  Graco
  • Model:  P1M080C/DMC3L300
  • Pmax.:  150 psi ( 10 bar)
• Material Previously Used:
  • Manufacturer:  Bergquist
  • Geneva GF 1500 Silicone

30 Day Guarantee

• Guaranteed to be as described
• Can be returned for flaws or malfunctions that were not disclosed
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.